DrayTek Logo

General Router FAQ

DrayTek Vigor Routers

Section Index

  1. Product Setup Guides
  2. Resetting & Router Firmware
  3. Wireless LAN
  4. Voice-over-IP (VoIP)
  5. VPN (Virtual Private Networking)
  6. Feature Setup
  7. Router Diagnostics
  8. PC Setup
  9. NAT Facilities
  10. Firewall/Security
  11. Miscellaneous Questions

I. Product Setup Guides
  1. Vigor 100 / 110 Setup (Ethernet Modem)
  2. Vigor 3100 SDSL Setup
  3. ADSL Troubleshooting Flowchart
  4. Vigor ADSL Router Troubleshooting Tips
  5. Vigor 2200USB Setup
  6. Cable Modem Setup (For NTL/Telewest/VirginMedia)
II. Resetting/Firmware:
  1. How do I completely reset the router?
  2. How do I set/change the router's password?
  3. What firmware version do I have?
  4. How do I upgrade/reset the router's firmware?
  5. How do I upgrade the router's firmware from an Apple Mac?
  6. How do I upgrade firmware remotely?
III. Wireless LAN (WLAN) Facilities:
  1. Wireless LAN Troubleshooting
  2. Overlapping Channels / Channel Selection
  3. WDS Modes Explanation
  4. Wireless LAN Security overview
  5. Comparison of WEP vs. WPA & WPA2
  6. WEP (Encryption) Setup
  7. WPA (Encryption/Authentication) Setup
  8. Wireless Access Control
  9. VPN over WLAN
  10. Using Multiple SSID's
IV. Voice-over-IP (VoIP):
  1. How does POTS passthrough work?
  2. Can I dial IP addresses from the handset?
  3. Which Codec is best to select?
  4. What type of Internet connection should I have for VoIP?
  5. How do I use the phone book?
  6. How do I set up and use a SIP Server?
  7. How do I use Digit Map?
  8. Where is the DrayTEL user guide?
  9. Setting up VoIP with other SIP Service Gateway/Registrars:
  10. How can I check the router is logged into the SIP server?
  11. How do I obtain VoIP Diagnostic logs?
  12. How should I set 'QoS Upstream'?
  13. Using Other Software to call to the Vigor:
  14. What happens if my phone is in use?
  15. What is the DTMF inband/outband setting for?
  16. Why are my keypresses not recognised?
  17. Can I call between the two phone ports?
V. VPN Setup Guides :
  1. Teleworker to Vigor with PPTP or IPSec
  2. Vigor to Vigor (LAN-to-LAN) with PPTP
  3. Setting up SSL VPNs
  4. Additional VPN Setup Guides (Includes 3rd Party Vendor Products)
    Please note, we are unable to offer specific support on 3rd party products.
  5. VPN Troubleshooting Guide
VI. Feature Setup:
  1. How do I set up static routes?
  2. How do I use Email Checking?
  3. What is the VLAN facility?
  4. How do I use Ethernet Port Throttling?
  5. What is T.38 Fax?
  6. How do I use Vigor's QoS facility?
  7. Setting up a True-DMZ Host
  8. Session & Bandwidth Limitation
  9. How do I set up the Vigor's printer port?
  10. How do I use Dynamic DNS Setup (DDNS)?
  11. How can I use 'scheduling'?
  12. How do I use the VigorCam?
  13. How do I set up the ISDN VTA?
  14. How do I enable Content Filtering (Parental Control)?
  15. How can I schedule content filtering?
  16. Setting up a 3G modem on a Vigor
VII. Diagnostics:
  1. How do I open a Telnet session to the router?
  2. Enabling Telnet in Windows Vista
  3. How do I use Syslog?
  4. What do the ADSL line signal figures mean?
  5. How do I decode firewall log entries?
  6. How do I produce router diagnostic logs?
  7. How can I use Ping to test my connection?
  8. How do I use Ethereal?
  9. Why does Traceroute not work with SPI?
  10. Capturing 3G modem information
VIII. PC Setup:
  1. How do I configure my OS to use the router for Internet access?
  2. How do I set a fixed IP address on my PC?
  3. How do I stop Windows using my dial-up modem?
  4. How do I check the PC’s TCP/IP setup?
IX. NAT Related Features:
  1. How do I make a local server accessible from the Internet?
  2. How do I forwarding protocols other than UDP/TCP?
  3. What is the difference between Port Mapping, Open Ports and DMZ?
  4. How do I enable VPN passthrough for an internal VPN server?
  5. How do I enable VPN passthrough on the Vigor2820?
  6. How many VPN tunnels can the Vigor passthrough?
  7. How do I use MultiNAT?
  8. How do I fix the outbound IP address for a MultiNAT client?
  9. How do I disable NAT?
X. Firewall/Security Features:
  1. How do I set up a firewall filter?
  2. How do I use Firewall Mail Alert?
  3. What is keep-state/SPI
  4. How do I use Admin Access Control?
  5. What does the router management options menu do?
XI. Miscellaneous Questions:
  1. How can I use AOL Broadband with the Vigor?
  2. How do I use a public subnet on the LAN (non-NAT operation)?
  3. How do I select the IP address used for incoming VPNs?
  4. How do I fix (preset) a DHCP allocation?
  5. How do I set the DHCP Lease time?
  6. How do I set the router's SNMP Name?
  7. Can I trigger 'Wake-on-LAN' (WOL) remotely?
  8. How do I change the MSS/MTU?
  9. How does DNS Operate on the Vigor?
  10. Why is my ISDN router is making too many calls?
  11. How do I find out the router WAN Port's MAC Address?
  12. How do IP addresses and subnets work?
  13. How can I improve my ADSL Speed/quality?
  14. Why don't I get the maximum speed on BeThere (ISP)?


NOTICE : This document and sub-sections are © SEG Communications and neither it or its component parts may be distributed in part or full without specific written consent. Information and products subject to change at any time without notice.